AJAX DoorProtect Plus.
Wireless opening detector notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house.
Authentication to prevent forgery
Jamming detection and communication channels encryption
Tampering alarm
Registers change in vertical slope angle, bangs and vibration
External contact is available for connecting third-party detectors
Operates up to 5 years without battery replacement
Principle of operation
The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.
Features
The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Wireless opening detector notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house.
Authentication to prevent forgery
Jamming detection and communication channels encryption
Tampering alarm
Registers change in vertical slope angle, bangs and vibration
External contact is available for connecting third-party detectors
Operates up to 5 years without battery replacement
Principle of operation
The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.
Features
The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Classification
Combined point magnetic contact and vibration radio channel security detector
Type of detector
Wireless
Installation method
Indoors
Compatibility
Operates with all Ajax hubs, range extenders
Sensing element
Reed switch, accelerometer
Alarm signal delivery time
0.15 s
Activation threshold
Small magnet — 1 cm
Big magnet — 2 cm
Tilt: more than 5°
Power supply
Battery: CR123A battery, 3 V
Battery life
Up to 5 years
Jeweller radio technology
Communication range with central unit — up to 1,200 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s
Temperature sensor
Available
Operating temperature range
From -10°С to +40°С
Permissible humidity
Up to 75%
Anti-sabotage
Protection against fraud
Jamming detection
Tamper-resistant
Remote setting and testing
+
Dimensions
Diameter: 20 mm
Height: 90 mm
Weight
29 g
Complete set
DoorProtect Plus opening detector
SmartBracket mounting panel
Two magnets
CR123A battery (pre-installed)
External contact
Installation set
User's guide
